E and H Field Dependence on Distance
The variation of electric field (E) and magnetic field (H) with distance depends on the physical situation. It is not always correct to assume a single rule like E ∝ 1/r² and H ∝ 1/r.
1. Static Electric Field (Point Charge)
For a point charge, the electric field is given by Coulomb’s law:
There is no magnetic field in this case.
2. Static Magnetic Field (Long Straight Wire)
For a long current-carrying wire:
Magnetic field decreases inversely with distance.
3. Electromagnetic Waves (Far Field)
In the radiation region (antenna or EM wave in free space):
Electric and magnetic fields decay at the same rate and are related by:
4. Summary Table
| Case | Electric Field (E) | Magnetic Field (H) |
|---|---|---|
| Point Charge (Electrostatics) | 1/r² | 0 |
| Long Wire (Magnetostatics) | — | 1/r |
| EM Radiation (Far Field) | 1/r | 1/r |
Final Takeaway
- E ∝ 1/r² and H ∝ 1/r is NOT a general rule
- Dependence changes with physical situation
- In radiation region, both E and H are proportional to 1/r
Important Concepts Related to E and H Fields
Understanding how electric field (E) and magnetic field (H) vary with distance leads to several key electromagnetic concepts.
1. Near Field vs Far Field
Near Field (Close to Source)
- Fields are not simple 1/r behavior
- Electric and magnetic fields are not in fixed ratio
- Reactive energy dominates (energy is stored, not radiated)
Typical behavior:
H also varies differently
Far Field (Radiation Region)
- True electromagnetic wave exists
- Both fields behave as 1/r
- Electric and magnetic fields are related by a constant ratio
2. Poynting Vector (Power Flow)
The Poynting vector represents power flow in an electromagnetic wave:
- Direction → wave propagation
- Magnitude → power per unit area (W/m²)
3. Inverse Square Law of Power
Even though E and H vary as 1/r in the far field, power density follows:
Because power spreads over a spherical surface:
4. Wave Impedance
In free space:
- Ratio of electric to magnetic field
- Determines wave behavior in medium
5. EM Field Regions (Antenna Theory)
| Region | Distance | Behavior |
|---|---|---|
| Reactive Near Field | Very close | Energy stored |
| Radiating Near Field | Intermediate | Mix of stored + radiated energy |
| Far Field | Far away | True wave (1/r behavior) |
6. Key Intuition
- Near field → energy exchange zone
- Far field → energy radiation zone
- Only far field behaves like a true wave
Final Takeaway
- Understand near vs far field behavior
- Poynting vector explains energy flow
- Wave impedance links E and H fields
Poynting Vector – Explanation with Examples
1. What is Poynting Vector?
The Poynting vector represents the power flow per unit area in an electromagnetic wave.
- Unit: W/m²
- Direction: direction of wave propagation
2. Numerical Example (Plane EM Wave)
Given:
These satisfy E/H ≈ 377 Ω.
Step 1: Calculate Poynting Vector
Substitute values:
3. Final Result
This means every 1 m² area carries 26.5 watts of power.
4. Direction Meaning
- E field → one direction (e.g., y-axis)
- H field → perpendicular direction (e.g., x-axis)
- S (E × H) → propagation direction (z-axis)
5. Another Example
Given:
Then:
6. Key Intuition
- E = electric field strength
- H = magnetic field strength
- S = actual energy flow in space
Poynting vector tells how much electromagnetic energy is moving through space.
Poynting Vector (S = E × H) Simulator
Poynting Vector and Ohmic Power Dissipation
The Poynting theorem explains the conservation of electromagnetic energy and accounts for electromagnetic power flow, stored energy, and ohmic power dissipation.
1. Poynting Vector
The Poynting vector represents the electromagnetic power flow per unit area.
S = E × H
SI Unit: W/m²
It tells us:
- Direction of electromagnetic energy flow.
- Magnitude of power flow per unit area.
- Total electromagnetic power crossing a surface.
2. Poynting Theorem
Poynting theorem describes the conservation of electromagnetic energy. It accounts for three important quantities:
01. Power flow
Power entering or leaving a volume.
02. Stored energy
Energy stored in electric and magnetic fields.
03. Ohmic loss
Power dissipated as heat.
Differential form:
∇ · S + ∂u/∂t + J · E = 0
Explanation of terms:
| Symbol | Meaning |
|---|---|
| S | Poynting vector |
| u | Electromagnetic energy density |
| J | Current density |
| E | Electric field intensity |
| J · E | Ohmic power dissipation per unit volume |
3. Ohmic Power Dissipation
Ohmic power dissipation is the electrical energy converted into heat due to the resistance of a conducting material.
Power dissipation per unit volume:
Pᵥ = J · E
Unit: W/m³
Total ohmic power dissipation:
Pohmic = ∫V J · E dV
Using Ohm's law:
For a conducting medium:
J = σE
Substituting into the power equation:
Pohmic = ∫V σE² dV
Where σ represents electrical conductivity.
4. Important Comparison for GATE
| Quantity | Purpose |
|---|---|
| Poynting vector | Electromagnetic power flow |
| Poynting theorem | Conservation of electromagnetic energy |
| J · E | Ohmic power per unit volume |
| ∫ J · E dV | Total ohmic power dissipation |
5. Important GATE Exam Takeaway
- Poynting vector represents electromagnetic energy flow.
- Poynting theorem accounts for ohmic power dissipation.
- J · E represents ohmic power dissipation per unit volume.
- Total ohmic loss is obtained by integrating over the volume.
Remember these formulas:
S = E × H
Wₘ = ½LI²
Pohmic = ∫V J · E dV
6. Practice MCQ
Which expression represents the total ohmic power dissipation in a conducting medium?