Skip to main content

Posts

What Is the Poynting Vector? Formula, Derivation and Applications

  E and H Field Dependence E and H Field Dependence on Distance The variation of electric field (E) and magnetic field (H) with distance depends on the physical situation. It is not always correct to assume a single rule like E ∝ 1/r² and H ∝ 1/r. 1. Static Electric Field (Point Charge) For a point charge, the electric field is given by Coulomb’s law: E ∝ 1/r² There is no magnetic field in this case. 2. Static Magnetic Field (Long Straight Wire) For a long current-carrying wire: H ∝ 1/r Magnetic field decreases inversely with distance. 3. Electromagnetic Waves (Far Field) In the radiation region (antenna or EM wave in free space): E ∝ 1/r ,    H ∝ 1/r Electric and magnetic fields decay at the same rate and are related by: E / H = η₀ ≈ 377 Ω ...

A certain cascaded amplifier arrangement has the following voltage gains of individual stages: Av1 = 10, ...

  Q. A certain cascaded amplifier arrangement has the following voltage gains of individual stages: A v1 = 10, A v2 = 20 and A v3 = 40. What is the overall voltage gain of the cascaded amplifier? Given: A v1 = 10 A v2 = 20 A v3 = 40 Step 1: Calculate Overall Voltage Gain For cascaded amplifiers, the overall voltage gain is the product of individual stage gains. A v = A v1 × A v2 × A v3 = 10 × 20 × 40 = 8000 Step 2: Convert Voltage Gain into Decibels (dB) Formula: Gain (dB) = 20 log 10 (A v ) = 20 log 10 (8000) = 20 × 3.903 = 78.06 dB Answer Option 4: 78 dB Answer: 78.06 dB ≈ 78 dB

What Is VSWR? Meaning, Formula, Range, and Importance

  VSWR (Voltage Standing Wave Ratio) is a measure of how efficiently radio-frequency (RF) power is transferred from a transmitter to an antenna through a transmission line. When a transmitter delivers RF power to an antenna through a transmission line: VSWR = 1:1 (Perfect impedance match): Maximum power is transferred to the antenna, with no reflected power. VSWR = 3:1 (Poor impedance match): A significant portion of the incident power is reflected back toward the transmitter, reducing the power delivered to the antenna. VSWR = ∞:1 (Total reflection): All incident power is reflected back toward the transmitter, and no power is delivered to the load (antenna). V S W R = 1 − ∣Γ∣ 1 + ∣Γ∣ ​ Where Γ Γ is the reflection coefficient. Why is VSWR important? Protects RF transmitters from excessive reflected power. Helps check antenna performance. Detects impedance mismatch. Helps identify cable or antenna problems. Improves RF transmission efficiency. Typical ...

In pure silicon, what is the time for an electron to drift 1 μm in an electric field of 100 V/cm? ...

Q. In pure silicon, what is the time for an electron to drift 1 μm in an electric field of 100 V/cm? Assume electron mobility of 1350 cm 2 /V-s. Given Data Distance (d) = 1 μm = 10 -4 cm Electric field (E) = 100 V/cm Electron mobility (μ) = 1350 cm 2 /V-s Step-by-Step Solution Step 1: Calculate Drift Velocity Drift velocity is given by: v d = μ × E = 1350 × 100 = 135000 cm/s Step 2: Calculate Time Time is calculated using: Time = Distance / Velocity t = 10 -4 / 135000 t = 7.4 × 1...

A car travels from city A to city B at a constant speed. If the speed of the car is increased by 20 km/h, it will reach destination 1 hour earlier ...

  Q. A car travels from city A to city B at a constant speed. If the speed of the car is increased by 20 km/h, it will reach destination 1 hour earlier. On the other hand, if its speed decreases by 20 km/h, it reaches 2 hours later than scheduled time. What is the usual time if it travels with routine speed? 1. 2 hr 2. 4 hr 3. 8 hr 4. 10 hr Step-by-Step Solution Let: Usual time = x hours Usual speed = y km/h Distance = Speed × Time = xy Case 1: Speed increased by 20 km/h Time decreases by 1 hour. Distance = (y + 20)(x - 1) xy = (y + 20)(x - 1) xy = xy - y + 20x - 20 -y + 20x - 20 = 0 ...

In CRO, if the signal of 12 μs rise time is observed as the signal with 15 μs rise time, calculate ...

  Q. In CRO, if the signal of 12 μs rise time is observed as the signal with 15 μs rise time, calculate the value of bandwidth of CRO, if the value of K is 0.35. 1. 36 kHz 2. 39 kHz ✓ 3. 42 kHz 4. 45 kHz Solution Step 1: Use the rise time formula t observed 2 = t CRO 2 + t signal 2 Given: Observed rise time = 15 μs Signal rise time = 12 μs K = 0.35 Step 2: Calculate CRO rise time t CRO = √(15² − 12²) = √(225 − 144) = √81 = 9 μs Step 3: Calculate bandwidth Bandwidth = K / t CRO = 0.35 / (9 × 10 -6 ) = 38.89 × 10 3 Hz = 38.89 kHz ≈ 39 kHz ...

Arrange the given regions of operation of transistors in a CMOS inverter when the input voltage (Vin) is swept from 0V to VDD.

  Q. Arrange the given regions of operation of transistors in a CMOS inverter when the input voltage (Vin) is swept from 0V to VDD. A. NMOS in cut-off, PMOS in linear region. B. NMOS in saturation, PMOS in linear region. C. NMOS in saturation, PMOS in saturation region. D. NMOS in linear, PMOS in saturation region. E. NMOS in linear, PMOS in cut-off region. Choose the correct answer: 1. A, D, E, B, C 2. A, D, C, E, B 3. A, B, C, D, E Correct Answer 4. C, D, E, B, A Solution & Explanation As the input voltage (Vin) increases from 0V to VDD, the operating regions of the NMOS and PMOS transistors change in the following sequence: A NMO...

Match the LIST-I with LIST-II LIST-I A. ∇ ⋅ D ⃗ = ρ v ∇⋅ D =ρ v ​ B. ∇ ⋅ B ⃗ = 0 ∇⋅ B =0 C. ∇ × E ⃗ = − ∂ B ⃗ ∂ t ∇× E =− ∂t ∂ B

  Answer: Option 1 Maxwell's Equations Understand the relationship between electric fields, magnetic fields, electric charges and electric currents. 1. Fundamental Concept Maxwell's equations describe four fundamental laws of electromagnetism. Each equation has two mathematical forms: Differential Form Describes the behaviour of electric and magnetic fields at a particular point in space. Integral Form Describes the behaviour of fields over a surface or around a closed path. 2. Four Fundamental Laws A Gauss's Law for Electricity ...


Contact Us

Name

Email *

Message *