Skip to main content

How Windowing Affects Your Periodogram


The windowed periodogram is a widely used technique for estimating the Power Spectral Density (PSD) of a signal. It enhances the classical periodogram by mitigating spectral leakage through the application of a windowing function. This technique is essential in signal processing for accurate frequency-domain analysis.

 

Power Spectral Density (PSD)

The PSD characterizes how the power of a signal is distributed across different frequency components. For a discrete-time signal, the PSD is defined as the Fourier Transform of the signal’s autocorrelation function:

Sx(f) = FT{Rx(Ï„)}

Here, Rx(Ï„)}is the autocorrelation function.

FT : Fourier Transform

 

Classical Periodogram

The periodogram is a non-parametric PSD estimation method based on the Discrete Fourier Transform (DFT):

Px(f) = \(\frac{1}{N}\) X(f)2

Here:

  • X(f): DFT of the signal x(n)

  • N: Signal length

However, the classical periodogram suffers from spectral leakage due to abrupt truncation of the signal.

 

Windowing to Mitigate Spectral Leakage

Spectral leakage can be minimized by applying a window function to the signal before computing the DFT. The resulting PSD estimate is called the windowed periodogram:

Pw(f) = \(\frac{1}{NW}\) Xw(f)2

Here:

  • w(n): Window function

  • W: Window normalization factor

Common Window Functions

  • Rectangular Window: Equivalent to the classical periodogram.

w[n]=1, 0≤n≤N−1

w[n]=0, otherwise

Where, N is the window length

  • Hamming Window: Reduces sidelobe amplitudes, improving frequency resolution.

w[n]=0.5(1−cos(\(\frac{\ 2\pi n}{N - 1}\ \))), 0≤n≤N−1

Where, N is the window length

  • Hanning Window: Similar to Hamming but with less sidelobe attenuation.

w[n]=0.54 – 0.46cos(\(\frac{\ 2\pi n}{N - 1}\ \)), 0≤n≤N−1

Where, N is the window length

  • Blackman Window: Offers even greater sidelobe suppression but at the cost of wider main lobes.

w[n]=0.42 – 0.5(cos(\(\frac{\ 2\pi n}{N - 1}\ \)) + 0.08(cos(\(\frac{\ 4\pi n}{N - 1}\ \)), 0≤n≤N−1

Where, N is the window length

 

Implementation Steps

  1. Segment the Signal: Divide the signal into overlapping or non-overlapping segments of length N.

  2. Apply a Window Function: Multiply each segment by a window function w(n).

  3. Compute the DFT: Calculate the DFT of the windowed segments.

  4. Average the Periodograms: For overlapping segments, average the periodograms to reduce variance.

     

Properties of the Windowed Periodogram

  • Bias: Windowing introduces bias in the PSD estimate as the window modifies the signal spectrum.

  • Variance: Averaging periodograms (Welch method) reduces variance but decreases frequency resolution.

  • Trade-Off: The choice of window affects the trade-off between spectral resolution and leakage suppression.

     

    MATLAB Code

    clc;
    clear;
    close all;

    fs = 48000;
    t = 0:1/fs:0.02;
    f_ping = 12000;

    % Base sine wave
    sine_wave = sin(2*pi*f_ping*t)';

    % Apply windows
    w_rect = ones(size(sine_wave));
    w_hann = hann(length(sine_wave));
    w_hamming = hamming(length(sine_wave));
    w_blackman = blackman(length(sine_wave));

    % Windowed signals
    s_rect = sine_wave .* w_rect;
    s_hann = sine_wave .* w_hann;
    s_hamming = sine_wave .* w_hamming;
    s_blackman = sine_wave .* w_blackman;

    % FFT
    Nfft = 4096;
    f = fs*(0:Nfft/2-1)/Nfft;

    % Function to compute and normalize spectrum
    get_norm_fft = @(sig) abs(fft(sig, Nfft))/max(abs(fft(sig, Nfft)));

    S_rect = get_norm_fft(s_rect);
    S_hann = get_norm_fft(s_hann);
    S_hamming = get_norm_fft(s_hamming);
    S_blackman = get_norm_fft(s_blackman);

    % Mainlobe power (±2 bins around peak)
    mainlobe_bins = 2;

    % Function to compute power ratio
    compute_power_ratio = @(S) ...
    deal( ...
    sum(S.^2), ... % Total power
    max(1, find(S == max(S), 1)), ... % Peak bin
    @(peak_bin) sum(S(max(1,peak_bin-mainlobe_bins):min(Nfft,peak_bin+mainlobe_bins)).^2), ...
    @(total, main) 10*log10((total-main)/main) ... % dB sidelobe/mainlobe ratio
    );

    % Calculate ratios
    [total_r, peak_r, get_main_r, get_slr_r] = compute_power_ratio(S_rect);
    main_r = get_main_r(peak_r); slr_r = get_slr_r(total_r, main_r);

    [total_h, peak_h, get_main_h, get_slr_h] = compute_power_ratio(S_hann);
    main_h = get_main_h(peak_h); slr_h = get_slr_h(total_h, main_h);

    [total_ham, peak_ham, get_main_ham, get_slr_ham] = compute_power_ratio(S_hamming);
    main_ham = get_main_ham(peak_ham); slr_ham = get_slr_ham(total_ham, main_ham);

    [total_b, peak_b, get_main_b, get_slr_b] = compute_power_ratio(S_blackman);
    main_b = get_main_b(peak_b); slr_b = get_slr_b(total_b, main_b);

    % Display Results
    fprintf('Window | Mainlobe Power | Sidelobe Power | Sidelobe/Main (dB)\n');
    fprintf('------------|----------------|----------------|--------------------\n');
    fprintf('Rectangular | %14.4f | %14.4f | %18.2f\n', main_r, total_r - main_r, slr_r);
    fprintf('Hann | %14.4f | %14.4f | %18.2f\n', main_h, total_h - main_h, slr_h);
    fprintf('Hamming | %14.4f | %14.4f | %18.2f\n', main_ham, total_ham - main_ham, slr_ham);
    fprintf('Blackman | %14.4f | %14.4f | %18.2f\n', main_b, total_b - main_b, slr_b);

    % Plot
    figure;
    plot(f, 20*log10(S_rect(1:Nfft/2)), 'k'); hold on;
    plot(f, 20*log10(S_hann(1:Nfft/2)), 'r');
    plot(f, 20*log10(S_hamming(1:Nfft/2)), 'g');
    plot(f, 20*log10(S_blackman(1:Nfft/2)), 'b');
    legend('Rectangular','Hann','Hamming','Blackman');
    xlim([f_ping-3000 f_ping+3000]); ylim([-100 5]);
    xlabel('Frequency (Hz)'); ylabel('Magnitude (dB)');
    title('Windowing Effects on Spectrum');
    grid on;

    Output 

    Window      | Mainlobe Power | Sidelobe Power | Sidelobe/Main (dB)
    ------------|----------------|----------------|--------------------
    Rectangular |         3.5771 |         4.9562 |               1.42
    Hann        |         4.3630 |         8.4370 |               2.86
    Hamming     |         4.2367 |         7.3928 |               2.42
    Blackman    |         4.4940 |        10.2410 |               3.58

     

     








Applications

  • Signal Processing: Analyzing frequency content of time-varying signals.

  • Communications: Evaluating spectrum occupancy in wireless systems.

  • Bioinformatics: Investigating periodicities in biological signals (e.g., EEG, ECG).

  • Seismology: Characterizing seismic wave frequencies.

     

    Further Reading

    1. Periodogram in MATLAB

Try Interactive Online Simulator to see the Effect

📊 MATLAB & ONLINE SIMULATIONS (Web-Based)
🎓 GATE & UGC - NET SOLUTIONS
📡 WIRELESS & SIGNAL PROCESSING


Contact Us

Name

Email *

Message *

Popular Posts

Hybrid Beamforming | Page 1

Beamforming Techniques Hybrid Beamforming... Page 1 | Page 2 | Hybrid Beamforming: Hybrid beam formation was developed to address some of the limitations of digital pre-coding approaches. Every antenna element is connected to an RF chain in digital pre-coding (beam forming) method. We also know that each RF chain is in charge of providing a separate data stream between the transmitter and the receiver. We know that a larger number of independent data streams leads to higher data rates. It has a spatial multiplexing feature for MIMO. As a result, we may assume that switching from MIMO to massive MIMO will benefit us more in terms of spatial multiplexing in massive MIMO, where each antenna is coupled to a single RF chain. We'll proceed with a definition of hybrid beam forming. Overview of hybrid beam forming with example: Unlike digital beam forming, more than one antenna element is connected to a single RF chain in hybr...
Read more

UGC NET Electronic Science Previous Year Question Papers with Solutions

Home / Engineering & Other Exams / UGC NET 2026 PYQ ⬇️ Download Papers and Solutions 📋 Exam Pattern 💡 Preparation Tips ❓ FAQs 📊 Exam Highlights: Electronic Science (88) Feature Details Junior Research Fellowship (JRF) ₹37,000 + HRA per month Eligibility M.Sc/M.Tech in Electronics (55%) Validity of Certificate JRF (3 Years) | Lectureship (Lifetime) 📥 Download UGC NET Electronics PDFs Complete collection of previous year question papers, answer keys and explanations for Subject Code 88. Start Downloading 📂 View All Question Papers June 2025 - Question Paper Download PDF June 2025 - Solved Paper + Explanation ...
Read more

MATLAB Code for Rms Delay Spread

RMS delay spread is crucial when you need to know how much the signal is dispersed in time due to multipath propagation, the spread (variance) around the average. In high-data-rate systems like LTE, 5G, or Wi-Fi, even small time dispersions can cause ISI. RMS delay spread is directly related to the amount of ISI in such systems. RMS Delay Spread [↗] Delay Spread Calculator Enter delays (ns) separated by commas: Enter powers (dB) separated by commas: Calculate   The above calculator Converts Power to Linear Scale: It correctly converts the power values from decibels (dB) to a linear scale. Calculates Mean Delay: It accurately computes the mean excess delay, which is the first moment of the power delay profile. Calculates RMS Delay Spread: It correctly calculates the RMS delay spread, defined as the square root of the second central moment of the power delay profile.   MATLAB Code  clc...
Read more

Comparisons among ASK, PSK, and FSK (with MATLAB + Simulator)

Modulation ASK, FSK & PSK Constellation MATLAB Simulink MATLAB Code Comparisons among ASK, PSK, and FSK 📘 Comparisons among ASK, FSK, and PSK 🧮 Online Simulator Bandwidth 🧮 MATLAB Code BER Analysis 📚 Further Reading 📂 View Other Topics on Comparisons among ASK, PSK, and FSK ... 🧮 Comparisons of Noise Sensitivity, Bandwidth, Complexity, etc. 🧮 MATLAB Code for Constellation Diagrams of ASK, FSK, and PSK 🧮 Online Simulator for ASK, FSK, and PSK Generation 🧮 Online Simulator for ASK, FSK, and PSK Constellation 🧮 Some Questions and Answers Comparisons among ASK, PSK, and FSK Comparison among ASK, FSK, and PSK Parameters ASK FSK PSK Variable Characteristics Amplitude ...
Read more

What is - 3dB Frequency Response? And applications

📘 Overview & Theory 📘 Application of -3dB Frequency Response 🧮 MATLAB Codes 🧮 Online Digital Filter Simulator 📚 Further Reading Filters What is -3dB Frequency Response?   Remember, for most passband filters, the magnitude response typically remains close to the peak value within the passband, varying by no more than 3 dB. This is a standard characteristic in filter design. The term '-3dB frequency response' indicates that power has decreased to 50% of its maximum or that signal voltage has reduced to 0.707 of its peak value. Specifically, The -3dB comes from either 10 Log (0.5) {in the case of power} or 20 Log (0.707) {in the case of amplitude} . Viewing the signal in the frequency domain is helpful. In electronic amplifiers, the -3 dB limit is commonly used to define the passband. It shows whether the signal remains approximately flat across the passband. For example, in pulse shapi...
Read more

Phase Shift Keying (PSK) Modulation & Demodulation (with Simulation)

Phase Shift Keying (PSK) Theoretical Framework: Phase Shift Keying (PSK) is a digital modulation paradigm where information is encoded by modulating the instantaneous phase of a continuous-wave carrier. In Binary PSK (BPSK), the most fundamental implementation, the bitstream is mapped onto two discrete phases separated by $\pi$ radians—typically representing binary '1' and '0'—resulting in an antipodal signaling scheme where each state change induces a phase reversal in the carrier. BPSK Transmitter Synthesis: The analytic representation of a BPSK signal $s(t)$ is defined as: \[ s(t) = \begin{cases} A_c \cos(2\pi f_c t), & \text{for symbol } m_1 \\ A_c \cos(2\pi f_c t + \pi) = -A_c \cos(2\pi f_c t), & \text{for symbol } m_0 \end{cases} \] NRZ-L m(t) × ...
Read more