Skip to main content

Comparisons among ASK, PSK, and FSK | And the definitions of each


  

Comparisons among ASK, PSK, and FSK





 

Simulator for Calculating Bandwidth of ASK, FSK, and PSK

The baud rate represents the number of symbols transmitted per second. Both baud rate and bit rate are same for binary ASK, FSK, and PSK.











Comparison among ASK, FSK, and PSK

Performance Comparison:

1. Noise Sensitivity:

   - ASK is the most sensitive to noise due to its reliance on amplitude variations.
   - PSK is less sensitive to noise compared to ASK.
   - FSK is relatively more robust against noise, making it suitable for noisy environments.

2. Bandwidth Efficiency:

   - PSK is the most bandwidth-efficient, requiring less bandwidth than FSK for the same data rate.
   - FSK requires wider bandwidth compared to PSK.
   - ASK's bandwidth efficiency lies between FSK and PSK.

3. Complexity:

   - ASK and FSK are relatively simpler to implement and demodulate.
   - Coherent PSK demodulation can be more complex due to carrier synchronization requirements.

4. Fading and Multipath Resilience:

   - FSK performs well in fading and multipath scenarios due to its frequency diversity properties.
   - PSK can be affected by fading, especially in frequency-selective fading conditions.
   - ASK may experience significant performance degradation in fading and multipath channels.

5. Applications:

   - ASK is commonly used in simple applications such as remote controls, RFID, and binary communication.
   - FSK is suitable for applications where noise immunity is important, such as wireless communication and telemetry systems.
   - PSK is widely used in digital communication systems, including modems, Wi-Fi, and digital broadcasting.

The choice of modulation technique depends on the specific requirements of the communication system, including the channel characteristics, noise levels, data rate, and complexity constraints. Each modulation technique has its strengths and weaknesses, and the best choice will depend on balancing these factors for the given scenario. 

Graphical or plot representation of ASK, FSK, and PSK










The above figures show that the carrier frequency for ASK is 10 Hz. For PSK, that is 5 Hz. But for FSK, carrier frequencies are 10 Hz and 2 Hz


Summary

  • ASK is simple to generate, and it has a less complex circuitry in comparison to FSK and PSK
  • As noise is very sensitive to amplitude so it has poor noise immunity.  
  • FSK is less susceptible to errors than ASK
  • FSK is suitable for high-frequency communication as modulation deals with two different high carrier frequencies here. 
  • FSK circuitry is moderately complex
  • The bit rate in FSK is higher than in ASK 
  • In FSK, noise immunity is high
  • PSK circuitry is very complex 
  • PSK has a higher bit rate as compared to FSK
  • PSK has better noise immunity than FSK

Why are ASK, FSK, and PSK used? 


Electronic devices are sensitive to amplitude, frequency, and phase, so these three digital modulation techniques are used during wireless data transfer.

 

Comparison of BER vs SNR among ASK, FSK, and PSK in MATLAB







(Get MATLAB Code)

Fig 2: Comparison of BER vs SNR among ASK, FSK, and PSK



Some Questions and Answers (Q&As)

  1. In a coherent Frequency Shift Keying (FSK) system, what is the primary challenge in achieving coherent detection?
    Answer: Maintaining phase synchronization between transmitter and receiver.
    Explanation: Coherent detection requires maintaining phase synchronization to correctly demodulate the signal. 
  2. Which of the following is a major disadvantage of Amplitude Shift Keying (ASK)?
    Answer: Susceptibility to noise and interference.
    Explanation: ASK is highly susceptible to noise because it relies on amplitude changes.
  3. Which modulation scheme is typically more bandwidth-efficient?
    Answer: Phase Shift Keying (PSK).
    Explanation: PSK is more bandwidth-efficient because it encodes information in phase shifts.
  4. In Phase Shift Keying (PSK), what is the impact of increasing the number of phase states?
    Answer: Higher data rates.
    Explanation: More phase states allow higher data rates as more bits can be encoded per symbol.
  5. Which of the following is a key advantage of using Non-Coherent FSK over Coherent FSK?
    Answer: Simpler receiver design.
    Explanation: Non-Coherent FSK has a simpler receiver design because it does not require phase synchronization.
  6. Why is Phase Shift Keying (PSK) considered more power efficient than Frequency Shift Keying (FSK)?
    Answer: PSK can maintain performance at lower signal-to-noise ratios.
    Explanation: PSK is more power efficient because it can achieve good performance at lower signal-to-noise ratios.
  7. Which characteristic of FSK modulation makes it advantageous for certain applications?
    Answer: Its robustness in high-noise environments.
    Explanation: FSK is robust in noisy environments because the frequency changes are distinct.
  8. What is the primary disadvantage of using higher-order PSK modulation schemes?
    Answer: Increased sensitivity to noise.
    Explanation: Increased sensitivity to noise due to smaller phase differences between symbols.
  9. Which modulation scheme is typically used in radio broadcasting?
    Answer: Frequency Modulation (FM).
    Explanation: FM is commonly used in radio broadcasting due to its robustness to noise.
  10. In a PSK system, what can be used to improve error performance?
    Answer: Using error correction coding.
    Explanation: Error correction coding helps to detect and correct errors, improving performance.

Read Also

  1.  Modulation Indices for Amplitude Modulation, Frequency Modulation, and Phase Modulation
  2. Constellation Diagrams of ASK, FSK, and PSK 
  3.  MATLAB Code for ASK, FSK, and PSK 
  4.  Simulation of ASK, FSK, and PSK using MATLAB Simulink
  5.  Theoretical BER vs SNR for BPSK 
  6.  Comparisons among Amplitude, Frequency and Phase Modulation

 
# difference between ask fsk psk  # ask psk fsk comparison  # compare ask fsk psk  # ask fsk psk difference  # difference between ask psk fsk  # ask vs fsk vs psk  # ask fsk psk modulation  #

People are good at skipping over material they already know!

View Related Topics to







Admin & Author: Salim

profile

  Website: www.salimwireless.com
  Interests: Signal Processing, Telecommunication, 5G Technology, Present & Future Wireless Technologies, Digital Signal Processing, Computer Networks, Millimeter Wave Band Channel, Web Development
  Seeking an opportunity in the Teaching or Electronics & Telecommunication domains.
  Possess M.Tech in Electronic Communication Systems.


Contact Us

Name

Email *

Message *

Popular Posts

MATLAB code for MSK

๐Ÿ“˜ Overview ๐Ÿงฎ MATLAB Codes ๐Ÿงฎ Theory ๐Ÿงฎ Simulator for MSK ๐Ÿ“š Further Reading  Copy the MATLAB Code from here % The code is developed by SalimWireless.com clc; clear; close all; % Define a bit sequence bitSeq = [0, 1, 0, 0, 1, 1, 1, 0, 0, 1]; % Perform MSK modulation [modSignal, timeVec] = modulateMSK(bitSeq, 10, 10, 10000); % Plot the modulated signal subplot(2,1,1); samples = 1:numel(bitSeq); stem(samples, bitSeq); title('Original message signal'); xlabel('Time (s)'); ylabel('Amplitude'); % Plot the modulated signal subplot(2,1,2); samples = 1:10000; plot(samples / 10000, modSignal(1:10000)); title('MSK modulated signal'); xlabel('Time (s)'); ylabel('Amplitude'); % Perform MSK demodulation demodBits = demodMSK(modSignal, 10, 10, 10000); % Function to perform MSK modulation function [signal, timeVec] = modulateMSK(bits, carrierFreq, baudRate, sampleFreq) % Converts a binary bit sequence in...

BER vs SNR for M-ary QAM, M-ary PSK, QPSK, BPSK, ...

๐Ÿ“˜ Overview of BER and SNR ๐Ÿงฎ Simulator for m-ary QAM and m-ary PSK ๐Ÿงฎ MATLAB Codes ๐Ÿ“š Further Reading Modulation Constellation Diagrams BER vs. SNR BER vs SNR for M-QAM, M-PSK, QPSk, BPSK, ... What is Bit Error Rate (BER)? The abbreviation BER stands for bit error rate, which indicates how many corrupted bits are received (after the demodulation process) compared to the total number of bits sent in a communication process. It is defined as,  In mathematics, BER = (number of bits received in error / total number of transmitted bits)  On the other hand, SNR refers to the signal-to-noise power ratio. For ease of calculation, we commonly convert it to dB or decibels.   What is Signal the signal-to-noise ratio (SNR)? SNR = signal power/noise power (SNR is a ratio of signal power to noise power) SNR (in dB) = 10*log(signal power / noise power) [base 10] For instance,...

MATLAB Code for BER performance of QPSK with BPSK, 4-QAM, 16-QAM, 64-QAM, 256-QAM, etc

๐Ÿ“˜ Overview ๐Ÿงฎ MATLAB Codes ๐Ÿงฎ Theory ๐Ÿงฎ Are QPSK and 4-PSK same? ๐Ÿ“š Further Reading   QPSK offers double the data rate of BPSK while maintaining a similar bit error rate at low SNR when Gray coding is used. It shares spectral efficiency with 4-QAM and can outperform 4-QAM or 16-QAM in very noisy channels. QPSK is widely used in practical wireless systems, often alongside QAM in adaptive modulation schemes [Read more...]   MATLAB Code clear all; close all; % Set parameters for QAM snr_dB = -20:2:20; % SNR values in dB qam_orders = [4, 16, 64, 256]; % QAM modulation orders % Loop through each QAM order and calculate theoretical BER figure; for qam_order = qam_orders     % Calculate theoretical BER using berawgn for QAM     ber_qam = berawgn(snr_dB, 'qam', qam_order);     % Plot the results for QAM     semilogy(snr_dB, ber_qam, 'o-', 'DisplayName', sprintf('%d-QAM', qam_order));  ...

Constellation Diagrams of ASK, PSK, and FSK

๐Ÿ“˜ Overview ๐Ÿงฎ Simulator for constellation diagrams of ASK, FSK, and PSK ๐Ÿงฎ Theory ๐Ÿงฎ MATLAB Codes ๐Ÿ“š Further Reading BASK (Binary ASK) Modulation: Transmits one of two signals: 0 or -√Eb, where Eb​ is the energy per bit. These signals represent binary 0 and 1.    BFSK (Binary FSK) Modulation: Transmits one of two signals: +√Eb​ ( On the y-axis, the phase shift of 90 degrees with respect to the x-axis, which is also termed phase offset ) or √Eb (on x-axis), where Eb​ is the energy per bit. These signals represent binary 0 and 1.  BPSK (Binary PSK) Modulation: Transmits one of two signals: +√Eb​ or -√Eb (they differ by 180 degree phase shift), where Eb​ is the energy per bit. These signals represent binary 0 and 1.    Simulator for BASK, BPSK, and BFSK Constellation Diagrams SNR (dB): 15 Add A...

Differences between Baseband and Passband Modulation Techniques

๐Ÿ“˜ Overview ๐Ÿงฎ Difference betwen baseband and passband ๐Ÿงฎ Baseband modulation techniques ๐Ÿงฎ Passband modulation techniques ๐Ÿ“š Further Reading   1. Frequency Translation Baseband Modulation: The signal occupies the lower end of the frequency spectrum, close to DC (0 Hz). Noise at these frequencies (such as 1/f noise or flicker noise) can significantly impact the signal.  Passband Modulation: The signal is shifted to a higher frequency range by modulating it with a carrier frequency. This translation can help to avoid low-frequency noise and interference, which are often more prevalent and stronger in the baseband. 2. Bandpass Filtering Baseband Modulation: The filtering of baseband signals is often limited by the need to preserve the low-frequency components of the signal. This makes it difficult to filter out low-frequency noise effectively. Passband Modulation: The modulated signal can be passed through a bandpass filter centered around t...

Theoretical BER vs SNR for binary ASK and FSK

๐Ÿ“˜ Overview & Theory ๐Ÿงฎ MATLAB Codes ๐Ÿ“š Further Reading Theoretical Ber vs SNR for Amplitude Shift Keying (ASK) The theoretical bit error rate (BER) for binary Amplitude Shift Keying (ASK) as a function of the signal-to-noise ratio (SNR) can be derived using the following expression: If we map the binary signals to 1 and -1 in ASK , the probability of bit error will be: BER = Q(√(2*SNR))   If we map the binary signals to 0 and 1 in ASK , the probability of bit error will be:    BER = Q(√(SNR/2))   Where: Q(x) is the Q-function, which is the tail probability of the standard normal distribution. SNR is the signal-to-noise ratio. N0 is the noise power spectral density. Where Q is the Q function In mathematics Q(x) = 0.5 * erfc(x/ √ 2)   Calculate the Probability of Error using Q-function for ASK: For ASK with amplitudes 0 and 1 : When bit '0' is transmitted, the received signal is noise only . When bit '1' is transmitted, the re...

MATLAB Code for Pulse Amplitude Modulation (PAM) and Demodulation

๐Ÿ“˜ Overview ๐Ÿงฎ MATLAB Code 1 ๐Ÿงฎ MATLAB Code 2 ๐Ÿงฎ MATLAB Code for Pulse Amplitude Modulation and Demodulation of Digital data ๐Ÿงฎ Other Pulse Modulation Techniques (e.g., PWM, PPM, DM, and PCM) ๐Ÿ“š Further Reading   Pulse Amplitude Modulation (PAM) & Demodulation MATLAB Script clc; clear all; close all; fm= 10; % frequency of the message signal fc= 100; % frequency of the carrier signal fs=1000*fm; % (=100KHz) sampling frequency (where 1000 is the upsampling factor) t=0:1/fs:1; % sampling rate of (1/fs = 100 kHz) m=1*cos(2*pi*fm*t); % Message signal with period 2*pi*fm (sinusoidal wave signal) c=0.5*square(2*pi*fc*t)+0.5; % square wave with period 2*pi*fc s=m.*c; % modulated signal (multiplication of element by element) subplot(4,1,1); plot(t,m); title('Message signal'); xlabel ('Time'); ylabel('Amplitude'); subplot(4,1,2); plot(t,c); title('Carrier signal'); xlabel('Time'); ylabel('Amplitude'); sub...