Skip to main content

Envelope Detector Online Simulator


General Envelope Detector Simulator





Envelope Detection and Amplitude-Based Modulations

Envelope detectors are fundamental for amplitude-based modulations because they exploit the fact that the instantaneous amplitude of the carrier encodes the message signal.

1. Why Envelope Detection Works

In amplitude modulation (AM), the modulated signal has the form: 

s(t) = [A_c + m(t)] cos(2Ï€ f_c t)
  • A_c is the carrier amplitude
  • m(t) is the message signal
  • f_c is the carrier frequency

The envelope of this waveform is: Envelope = |A_c + m(t)|. An envelope detector (e.g., a diode + RC circuit) follows the peaks of the carrier, reproducing A_c + m(t). After removing the DC offset (carrier), the original message m(t) is recovered.

2. Envelope Detector Schematic

Below is a simple block diagram of a diode + RC envelope detector:

AM Input Diode R C Output (Envelope)

3. Amplitude-Based Modulations Suitable for Envelope Detection

  • DSB-AM (Double Sideband AM with Carrier): Standard AM; envelope detection works perfectly.
  • DSB-LC (Large Carrier): Strong carrier amplitude; envelope detection works easily.
  • VSB (Vestigial Sideband): Partial sideband suppression; works if residual carrier exists.
  • PAM (Pulse Amplitude Modulation): Pulses encode message amplitudes; envelope detection tracks pulse amplitudes.
  • AM Stereo: Radio broadcasting; information is in amplitude envelope.

4. When Envelope Detection Fails

  • Carrier fully suppressed signals (e.g., DSB-SC) – signal crosses zero; envelope cannot be detected directly.
  • Phase or frequency modulations (e.g., PSK, FM) – amplitude carries no information.
  • Very noisy channels – envelope may be distorted and unreliable.

Summary

Envelope detection works because AM signals encode the message in the instantaneous amplitude of the carrier. It is best suited for AM, DSB-LC, VSB, and PAM with a carrier. It does not work for carrierless AM (DSB-SC), FM, or PSK signals.


Further Reading

    1. AM Modulation Online Simulator
    2. Superheterodyne Receiver Online Simulator

    People are good at skipping over material they already know!

    View Related Topics to







    Contact Us

    Name

    Email *

    Message *

    Popular Posts

    Constellation Diagrams of ASK, PSK, and FSK with MATLAB Code + Simulator

    📘 Overview of Energy per Bit (Eb / N0) 🧮 Online Simulator for constellation diagrams of ASK, FSK, and PSK 🧮 Theory behind Constellation Diagrams of ASK, FSK, and PSK 🧮 MATLAB Codes for Constellation Diagrams of ASK, FSK, and PSK 📚 Further Reading 📂 Other Topics on Constellation Diagrams of ASK, PSK, and FSK ... 🧮 Simulator for constellation diagrams of m-ary PSK 🧮 Simulator for constellation diagrams of m-ary QAM BASK (Binary ASK) Modulation: Transmits one of two signals: 0 or -√Eb, where Eb​ is the energy per bit. These signals represent binary 0 and 1.    BFSK (Binary FSK) Modulation: Transmits one of two signals: +√Eb​ ( On the y-axis, the phase shift of 90 degrees with respect to the x-axis, which is also termed phase offset ) or √Eb (on x-axis), where Eb​ is the energy per bit. These signals represent binary 0 and 1.  BPSK (Binary PSK) Modulation: Transmits one of two signals...
    Read more

    Fading : Slow & Fast and Large & Small Scale Fading (with MATLAB Code + Simulator)

    📘 Overview 📘 LARGE SCALE FADING 📘 SMALL SCALE FADING 📘 SLOW FADING 📘 FAST FADING 🧮 MATLAB Codes 📚 Further Reading LARGE SCALE FADING The term 'Large scale fading' is used to describe variations in received signal power over a long distance, usually just considering shadowing.  Assume that a transmitter (say, a cell tower) and a receiver  (say, your smartphone) are in constant communication. Take into account the fact that you are in a moving vehicle. An obstacle, such as a tall building, comes between your cell tower and your vehicle's line of sight (LOS) path. Then you'll notice a decline in the power of your received signal on the spectrogram. Large-scale fading is the term for this type of phenomenon. SMALL SCALE FADING  Small scale fading is a term that describes rapid fluctuations in the received signal power on a small time scale. This includes multipath propagation effects as well as movement-induced Doppler fr...
    Read more

    Theoretical BER vs SNR for BPSK

    Theoretical Bit Error Rate (BER) vs Signal-to-Noise Ratio (SNR) for BPSK in AWGN Channel Let’s simplify the explanation for the theoretical Bit Error Rate (BER) versus Signal-to-Noise Ratio (SNR) for Binary Phase Shift Keying (BPSK) in an Additive White Gaussian Noise (AWGN) channel. Key Points Fig. 1: Constellation Diagrams of BASK, BFSK, and BPSK [↗] BPSK Modulation Transmits one of two signals: +√Eb or −√Eb , where Eb is the energy per bit. These signals represent binary 0 and 1 . AWGN Channel The channel adds Gaussian noise with zero mean and variance N₀/2 (where N₀ is the noise power spectral density). Receiver Decision The receiver decides if the received signal is closer to +√Eb (for bit 0) or −√Eb (for bit 1) . Bit Error Rat...
    Read more

    Understanding the Q-function in BASK, BFSK, and BPSK

    Understanding the Q-function in BASK, BFSK, and BPSK 1. Definition of the Q-function The Q-function is the tail probability of the standard normal distribution: Q(x) = (1 / √(2Ï€)) ∫ x ∞ e -t²/2 dt What is Q(1)? Q(1) ≈ 0.1587 This means there is about a 15.87% chance that a Gaussian random variable exceeds 1 standard deviation above the mean. What is Q(2)? Q(2) ≈ 0.0228 This means there is only a 2.28% chance that a Gaussian value exceeds 2 standard deviations above the mean. Difference Between Q(1) and Q(2) Even though the argument changes from 1 to 2 (a small increase), the probability drops drastically: Q(1) = 0.1587 → errors fairly likely Q(2) = 0.0228 → errors much rarer This shows how fast the tail of the Gaussian distribution decays. It’s also why BER drops drama...
    Read more

    BER vs SNR for M-ary QAM, M-ary PSK, QPSK, BPSK, ...(MATLAB Code + Simulator)

    📘 Overview of BER and SNR 🧮 Online Simulator for BER calculation of m-ary QAM and m-ary PSK 🧮 MATLAB Code for BER calculation of M-ary QAM, M-ary PSK, QPSK, BPSK, ... 📚 Further Reading 📂 View Other Topics on M-ary QAM, M-ary PSK, QPSK ... 🧮 Online Simulator for Constellation Diagram of m-ary QAM 🧮 Online Simulator for Constellation Diagram of m-ary PSK 🧮 MATLAB Code for BER calculation of ASK, FSK, and PSK 🧮 MATLAB Code for BER calculation of Alamouti Scheme 🧮 Different approaches to calculate BER vs SNR What is Bit Error Rate (BER)? The abbreviation BER stands for Bit Error Rate, which indicates how many corrupted bits are received (after the demodulation process) compared to the total number of bits sent in a communication process. BER = (number of bits received in error) / (total number of tran...
    Read more

    Pulse Shaping using Raised Cosine Filter (with MATLAB + Simulator)

      MATLAB Code for Raised Cosine Filter Pulse Shaping clc; clear; close all ; %% ===================================================== %% PARAMETERS %% ===================================================== N = 64; % Number of OFDM subcarriers cpLen = 16; % Cyclic prefix length modOrder = 4; % QPSK oversample = 8; % Oversampling factor span = 10; % RRC filter span in symbols rolloff = 0.25; % RRC roll-off factor %% ===================================================== %% Generate Baseband OFDM Symbols %% ===================================================== data = randi([0 modOrder-1], N, 1); % Random bits txSymbols = pskmod(data, modOrder, pi/4); % QPSK modulation % IFFT to get OFDM symbol tx_ofdm = ifft(txSymbols, N); % Add cyclic prefix tx_cp = [tx_ofdm(end-cpLen+1:end); tx_ofdm]; %% ===================================================== %% Oversample the Baseband Signal %% ===============================================...
    Read more

    Difference between AWGN and Rayleigh Fading

    📘 Introduction, AWGN, and Rayleigh Fading 🧮 Simulator for the effect of AWGN and Rayleigh Fading on a BPSK Signal 🧮 MATLAB Codes 📚 Further Reading Wireless Signal Processing Gaussian and Rayleigh Distribution Difference between AWGN and Rayleigh Fading 1. Introduction Rayleigh fading coefficients and AWGN, or Additive White Gaussian Noise (AWGN) in Wireless Channels , are two distinct factors that affect a wireless communication channel. In mathematics, we can express it in that way. Fig: Rayleigh Fading due to multi-paths Let's explore wireless communication under two common noise scenarios: AWGN (Additive White Gaussian Noise) and Rayleigh fading. y = h*x + n ... (i) Symbol '*' represents convolution. The transmitted signal x is multiplied by the channel coeffic...
    Read more